iBLD42NR-H-T
- Manual Quote
| 1 | VDD | 10V~50Vdc |
|---|---|
| 2 | GND | |
| 3 | A | RS485-A |
| 4 | B | RS485-B |
| 5 | A | RS485-A |
| 6 | B | RS485-B |
| 7 | GND | |
| 8 | +5V | +5V +5V <=30mA |
| 2D | 1.3 MB |
| 3D | 3.58 MB |
| iBLD42NR-H-T motorOperatingSpecifications | 529.33 KB |
Description
Product Center Integrated Brushless Motors
1. Adopts a dedicated 32-bit motor control chip
2. Voltage class 12–48 VDC, wide voltage input
3. Supports multiple speed control modes (PWM / analog / communication)
4. Control functions: start/stop, forward/reverse rotation, braking, etc.
5. RS485 communication with Modbus protocol support
6. High-precision dual closed-loop control of speed and current
7. Software configuration of control signal limits, PID, acceleration/deceleration, current values, etc.
8. Protections: overvoltage, undervoltage, overcurrent, over-temperature, stall, etc.
9. Outstanding cost-performance, economical and efficient
Widely used in various small and medium-sized automation equipment and instruments, such as electronics processing equipment, 3C custom automation equipment, screw locking machines, wire stripping machines, winding machines, terminal crimping machines, laser machines, marking machines, inkjet printers, small and medium-sized engraving machines, automatic handling equipment, special CNC machine tools, packaging equipment and robots.
The iBLD42NR-H-T series integrated closed-loop brushless motor is a cost-effective closed-loop motor independently developed by Changzhou Fulling Motor Co., Ltd. It uses a dedicated 32-bit motor control chip with high integration, compact size and comprehensive protections. The new PWM control technology gives the motor high precision, low vibration, low noise and excellent stability.
iBLD42NR-H-T offers the following three speed control options; users may choose either (configured via host software):
External analog speed control: via the FULLING host software, set the control mode (0x0002) to 0; speed can then be controlled by external analog output or a potentiometer (recommended 5K–100K).
External PWM speed control: via the FULLING host software, set the control mode (0x0002) to 1 or 2; a PWM digital signal with 5 V amplitude and 1 kHz–20 kHz frequency can be applied between SV/PWM and GND for speed control; motor speed varies linearly with its duty cycle.
Communication speed control: via the FULLING host software, set the control mode (0x0002) to 3, set the target speed (0x0004) and set communication start/stop (0x0003) to 1.
JST B08B-PASK 8
(JST B06B-XASK, 6-pin)
Datasheet download: 1729905128965405
