FE17-33

Product Center Encoders

DUMMY

Suitable Motor Motor size 38,42 / Suitable for 38,42 and above (Brushless/Servo Motor) Motor Shaft diameter 4mm,5mm,6mm,6.35mm Suitable for shaft diameter 4mm,5mm,6mm,6.35mm Storage Temperature-40 ℃ ～ 85 ℃ Environmental conditions Application No corrosive, flammable, explosive, conductive gas, liquid and dust. Temperature-25 ℃ ～ 80 ℃ Humidity 85% RH No more than 85% RH Supply Voltage5V ± 0.5V Current Consumption≤ 120mA Differential Single Output5V,GND,Z-,Z+,B-,B+,A-,A+,HW-,HW+,HV-,HV+,HU-,HU+ Output Level modeTTL ( TTL Compatible) Index Width1/4T or 1/2T or 1T ( According to the needing) Differential Output Voltage (VoH) ≥ 3.4V High Level Output (VoH) ≥3.4V Electrical Parameter (VoL) ≤ 0.5V Low Level Output (VoL) ≤0.5V Differential Signal Output Format 26C31 Line Drive 26C31 Unit /CPR ） Optional Resolution2500 ( ) Pole-pairs2/4/5 ( According )HU/HV/HW 120 ° Duty Cycle50% ± 10%A/B Phase difference90 °± 10 ° Frequency Response≤ 500KHz = ( (Rpm) × )/60 Note: The signal frequency = (Speed(Rpm) * number of Lines)/60

DUMMY

FE17-33 series six-channel fully reflective integrated photoelectric encoder, 206.16 KB

Default six-channel full differential output waveform

The diagram shows only the positive-side encoder output waveforms.

Attention: Default six-channel fully differential signal output waveform.The figure only shows the encoder outputs positive signal waveform.

Datasheet download: 1703061700117217