Gold Mandolin
- Manual Quote
| Electrical Specifications | |
|---|---|
| 5/400·Minimum supply voltage | 100 VDC |
| 7/400·Minimum supply voltage | 100 VDC |
| 5/400·Rated supply voltage | 325 VDC |
| 7/400·Rated supply voltage | 325 VDC |
| 5/400·Maximum supply voltage | 400 VDC |
| 7/400·Maximum supply voltage | 400 VDC |
| 5/400·Maximum continuous power output | 1600 W |
| 7/400·Maximum continuous power output | 2300 W |
| 5/400·Efficiency at rated power (typical conditions) | > 98 % |
| 7/400·Efficiency at rated power (typical conditions) | > 98 % |
| 5/400·Control auxiliary power supply voltage selection | 18 to 40 VDC |
| 7/400·Control auxiliary power supply voltage selection | 18 to 40 VDC |
| 5/400·Control auxiliary power supply | ≤ 5 VA without external load; ≤ 8 VA with full external load |
| 7/400·Control auxiliary power supply | ≤ 5 VA without external load; ≤ 8 VA with full external load |
| 5/400·Sinusoidal peak current | 5 A |
| 7/400·Sinusoidal peak current | 7 A |
| 5/400·Continuous RMS current (Ic) | 3.55 A |
| 7/400·Continuous RMS current (Ic) | 4.95 A |
| 5/400·Peak current limit | 2 x Ic |
| 7/400·Peak current limit | 2 x Ic |
| Physical Specifications | |
| Weight | 200 g (7.05 oz) |
| Dimensions | 70.0 x 70.0 x 34.0 (2.76" x 2.76" x 1.34") |
| Mounting method | Mounted on PCB |
Description
Overview
Small yet powerful servo drive, mounted on PCB board
Gold Mandolin Highlights:
Gold Mandolin is a high-efficiency, low-cost and durable driver that can be mounted on a PCB board. The driver can output 2300 W continuous power or 4600 W peak power and is intelligent and can be used in compact packaging environments.
Gold Mandolin driver is DC powered and supports current loop, speed loop, position loop and advanced position mode. It can be used with permanent magnet synchronous brushless motor, DC brush motor, linear motor or voice coil motor. Its design is suitable for any type of sine wave and square wave commutation and vector control.
Gold Mandolin can be directly powered by a 100-400V DC power supply. Gold Mandolin only needs to be connected to the main power supply (VP+ and VN-) when running, and does not need to provide logic power. If the customer needs the backup function to store control parameters, then a 18v to 40v DC power supply needs to be provided to access the driver. This design can provide customers with a very flexible backup solution choice.
Gold Mandolin can be used alone or as part of a distributed configuration multi-axis motion system on a real-time network. The drive can be easily set up and tuned using the Elmo Application Studio (EASII) software tool, which is fully programmable through the Elmo motion control language.
Gold Mandolin Highlights:
Gold series core motion control technology
Ultra-compact, high power density
High efficiency, high bandwidth performance
Multiple communication options: Ether CAT, CAN open, USB, Ethernet, RS-232
Supports multiple encoder feedbacks
Advanced filter and gain adjustment combinations enhance system dynamic performance
Vector controlled sinusoidal commutation
Catalog Number and Configurations
