B-TPA 200G
- Manual Quote
| Wheel Ø [mm] | 200 |
|---|---|
| Wheel width [mm] | 40 |
| Load capacity at 4 km/h [kg] | 250 |
| Bearing type | plain bore |
| Total height [mm] | 235 |
| Plate dimensions [mm] | 140 x 110 |
| Bolt hole spacing [mm] | 105 x 75–80 |
| Bolt hole Ø [mm] | 11 |
Description
Product Introduction
Wheels and castors in the TPA series have a tread of high-quality thermoplastic rubber-elastomer (TPE) and an impact-resistant polypropylene wheel centre. The grey tread with a hardness of 85 Shore A is chemically bonded to the wheel centre. The wheels are non-marking and characterised by low rolling and swivel resistance.
The oil in the tread may cause some discolouration on sensitive surfaces. In such cases, the VPP , POES , POEV oder PATH series can be used as an alternative.
standard-rubber-tpa – Specifications (see the parameter table above for this model)
